Technology is thinking about the environment:our buildings withstand tornadoes and hurricanes.
The best building technology designed to sustain tornadoes, hurricanes and has thermal qualities that keeps a structure 57% cooler in summer and 57% warmer in winter.
The JK Structure Construction Technology comprises of JK Panel (Patented Design) and JK Beam wrapped in a chicken mesh which is injected with a lightweight concrete mixture that comprises of Cement, Sand, EPS Beads, polypropylene fibres, bonding/EPS disbursement additive and water. The product can be further reinforced with Steel bars, dependent on the structural requirements. The lightweight cement mixture is then injected with either an electric or diesel pump up to 60m away.
Applications
Technology for large, medium and small environments: homes, swimming pools, tunnels, highways, offices and more. Euro Disney was built 100% with our technology.
JK Structure System allows the construction of high-quality, low-cost and environment and culture friendly.
Without framework of steel-reinforced alleviated concrete:
• HIGH QUALITY: JK Structure houses and buildings are SAFE; they are earthquake, hurricane, and termite-resistant and are completely fire-proof.
• SOUND LIVING CONDITIONS: the JK construction process incorporates sound-and-thermal-insulation, and the homogeneous structure of the walls results in “walls that breathe well” and in houses that can therefore more easily and cost-effectively be air-conditioned.
• COST EFFECTIVE: JK Strucure houses and buildings are easy, fast and cost effectively built “on site” thanks to the combination of the revolutionary JK Structure a three-dimensional Galvanized Steel Mesh reinforced with galvanized wire-beams and a Special Alleviated Concrete incorporating thermal-and-sound insulation. Non-skilled labor and only basic construction equipment is needed.
JK Panel
The JK Structure Panel is expanded steel, cast and expanded in a continuous process from a 1.6mm thick and 30cm wide galvanized steel sheet coil, with the following standard dimensions:
HEIGHT: 3m (It can be tailor-made to any smaller length at 25cm increments)
WIDTH: 1.2m
THICKNESS: 8cm
AREA: 3.60m²
WEIGHT: 12Kg
THE JK STRUCTURE PANEL
The JK Beam
The wire beams are used vertically and horizontally to stiffen the panel and act as further reinforcement. The JK Beam is made to meet the following standards:
Material: Low Carbon Steel Wire (Max 0.1%). As per DIN 17140-D9
Width: Type 1: 8cm (Horizontal Assembly & Stiffening)
Type 2: 7cm & 6cm (Vertical Assembly & Stiffening)
Length: 5.85m (To fit in 20 & 40Ft Containers or trucks)
Weight: 4kg approx. 0.7Kg/metre for the 8cm size
Wire diameter: 4.5mm
Zigzag wave: length 150mm
Zigzag Overlap: Approx. 2mm
Zinc Coating: min 110g/m² if possible higher (A coating with Zinc-Aluminium is sought)
Maximum Elasticity: 450N/mm²
Minimum Weld: Strength 5,000N
The Lightweight Cement Mixture
Considering the materials mentioned needed, one can notice that most of them are readily available in the USA, except for three of them being the JK Panel, JK Beam and the chemical additive. The reason for this proposal and necessary funding is so that we will then be able to make the JK Panel locally and the JK Beam will be imported or until a local producer can be sourced. The same applies to the chemical additive used in the mixture.